View 1116260000_4651821.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

292 component carriers and housings
293 component carriers and housings housings weidm?ller dk 4 and dkt 4 terminals are suitable for the installation of electronic components with a maximum diameter or width of 4.5 mm. four independent clamp- ing yoke screw connections are available. a snap-on frame expands the installation space in the dk4 by 6 mm respectively. depending on type, these modular termi- nals are suitable for mounting on ts 32, ts 35 x 7.5 or ts 35 x 15 mounting rails according to european standards en 50 035 and en 50 022. weidm?ller wdk 2.5 terminals are suitable for the installation of electrical components with a maximum width of 4 mm. as many as four independent clamp- ing yoke screw connections or 4 6.3 x 0.8 tab connections are available. these termi- nals are suitable for mounting on ts 35 x 7.5 or ts 35 x 15 mounting rails. weidm?ller eg 1 housings offer 4 screw connections and, as acces- sories, up to 4 0.8 x 4.8 mm solder/tab connections on a width of 18 mm. the screw clamp busbar ends with a solder ring inside the housing. two end plates seal the module. depending on type, the modules are mounted on ts 32, ts 35 x 7.5 or ts 35 x 15 mounting rails. weidm?ller eg 2 housings the external shape of these housings cor- responds to type eg 1. four screw con- nections or up to 8 0.8 x 6.6 mm/0.8 x 2.8 mm tab connectors are connected with a printed circuit board in the housing. they can be mounted on ts 32, ts 35 x 7.5 or ts 35 x 15 mounting rails. weidm?ller eg 3 housings provides 6 screw connections or 12 0.8 x 6.3 mm/0.8 x 2.8 mm tab connec- tions on a width of 22.5 mm. as an acces- sory, weidm?ller offers a shaped printed circuit board with a 2.54 mm hole grid or fully copper-coated. the engagable combination foot allows the terminal to be mounted on ts 32, ts 35 x 7.5 or ts 35 x 15 mounting rails. the mpl mounting plate is used to mount the housing directly (without mounting rail). due to the sliding foot construction, the eg 3 can be turned through 180 in all types of assembly (e.g. exchanging input and output). weidm?ller housings type wavebox it is essential to provide fit-for-use housings for modern electronic components. setting and control functions must be easily car- ried out and technical requirements with respect to heat dissipation and emv prop- erties should be supported. an ideal design saves space and wiring costs in the switchgear cabinet. in addition, ergonomics and design are becoming increasingly important for high- quality electronic products. these are the criteria that led to the devel- opment of wavebox. simplified produc- tion methods (shaft soldering, smd) ensure cost-savings for the customer. the wavebox is characterised by: ?optimum width for any application (12.5 mm, 17.5 mm, 22.5 mm) ?large component assembly surface; smds can be mounted on the solder side ?ul94 flammability class v2 ?no tools required for assembly ?plug-in printed circuit board ?plug-in cross-connection via zqv 2.5 n ?hinged, transparent cover ?blz 5.08 screw/plug and socket con- nector ?blfz 5.08 optional tension clamp/plug and socket connector ?marking option with ws tags ?mounts onto ts 35 weidm?ller individual parts for rs 70 locking socket latch together to form units from 20 mm in width. any desired intermediate parts or feet can be connected between two side pieces (locking feet) at intervals of 5 mm. in this way, a carrier module is constructed for pcb, on which various components can be soldered. the assembly snaps onto ts 32, ts 35 x 7.5 or ts 35 x 15 mount- ing rails. the weidm?ller rsx custom circuit module is a largely prefabricated unit wich accepts up to 5 components such as resistors, diodes, varistors or capacitors via soldering terminals. the components are connected via screw clamps or tab connections. this module is also suitable for mounting on ts 32, ts 35 x 7.5 or ts 35 x 15 mounting rails. weidm?ller locking socket profiles the rs 45, rs 80 and rs 100 profiles are available as 2 m long strips. the extruded profiles can be easily cut to any length with a saw. in this way, a carrier module is con- structed for a printed circuit board on which various components can be solder- ed. locking feet can be slid into these pro- files for mounting on ts 32, ts 35 x 7.5 or ts 35 x 15 mounting rails. the sliding foot construction of the rs 80 also allows the fixing foot be turned through 180? weidm?ller eg 4 housing as type eg 3, offers the same width of 22.5 mm. however, the greater installation depth (75 mm) and height (109 mm) allow the installation of more complex circuit configurations. the built-in installation can be connected via 6 screw connections. the snap-on combination foot allows the terminal to be mounted on ts 32, ts 35 x 7.5 or ts 35 x 15 mounting rails. due to the sliding foot construction, the eg 4 can be slid forwards or backwards on the locking foot, and can be turned through 180 (e.g. exchanging of input and out- put). weidm?ller eg 5 housings correspond to type eg 4. the eg 5 has 12 screw connections, which can be wired with solder lugs inside the housing. the snap-on combination foot allows the ter- minal to be mounted on ts 32, ts 35 x 7.5 or ts 35 x 15 mounting rails. due to the sliding foot construction, the eg 4 can be slid 6 mm forwards or backwards on the engaging foot and can be turned through 180 (e.g. exchanging input and output). weidm?ller eg 6 housings have a bus-suitable contact carrier. the bus connection is created by directly mounting several housings in a row. 32 connections are available on both sides of the housing as crimp connector block contacts. the housing accepts printed cir- cuit boards with dimensions of 100 x 120 mm. the printed circuit board is adapted with a vg 64 din strip. the front panel is screwed onto the circuit board similar to the 19" technology. the locking foot allows easy mounting onto the ts 35 mounting rail. weidm?ller seg/u housing enable the plug-in module assembly of a 70 x 52 x 1 mm printed circuit board. the circuit board is attached to the accessory cover plate via snap-in hooks. the housing contains a 13-pole socket block for instal- lation of the module; 6 screw connections are available for connection. the permissi- ble power loss in the housing during con- tinuous operation of terminals in rows amounts to 1.5w, depending on the sur- face temperature of the soldered compo- nents. the snap-on combination foot allows the housings to be mounted on ts 32, ts 35 x 7.5 or ts 35 x 15 mounting rails.
6 mm 9 mm 0.5? mm 2 0.5? mm 2 awg 22?2 0.5-1.0 nm 1 4 mm 2 380 v~ 10 a 0.5 w dk 4 pa dk 4 pa 1537960000 1115460000 dk 4/35 pa dk 4/35 pa 8203490000 1115560000 dk 4 ra dk 4 ra 0690960000 0690960000 dk 4 ra/35 dk 4 ra/35 0691060000 0691060000 type cat. no. qty. ts 32 0122800000 2 m ts 35 x 7.5 0383400000 2 m ts 35 x 15 0498000000 2 m ewk 1 (8.5) 0206160000 50 ew 35 (8.5) 0383560000 50 ap pa (1.5) 0359260000 20 tsch 4 0363360000 100 stb 8.5 0215700000 50 ps (?2.3) 0180400000 20 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 vh 10 0446600000 100 bs m 2.5 x 14 0266800000 100 ad 4 0303400000 50 bsk m 2.5 x 18 0303300000 100 qb 2* 0482700000 100 qb 3* 0482800000 50 qb 4* 0482900000 50 qb 75 blank* 0526400000 10 insulation profile 0526700000 * accessories see terminals catalogue 294 dimensions terminal width (+fitting tolerance 0.2) insulating stripping length connection data screw connection, solid screw connection, stranded conductor cross-section tightening torque range torque phase with dms 2 electric screwdriver rated data acc. to vde rated cross-section rated voltage rated current power loss connection diagram ordering data terminal for ts 32 y type cat. no. for ts 35 w type cat. no. matching contour frame for ts 32 y type cat. no. for ts 35 w type cat. no. accessories mounting rail (2 m lenghts) end bracket for ts 32 (thickness mm) for ts 35 end plate (thickness mm) partition socket for test plug test plug (pin diameter) cross-connection 2-pole (preassembled) 3-pole 4-pole 10-pole switchable cross-connection bracket connection sleeve fixing screw cover plate (4 terminals) fixing screw (plastic) cross connection bridge terminals dk 4 dkt 4 6 mm 9 mm 0.5? mm 2 0.5? mm 2 awg 22?7 0.5 - 1.0 nm 1 4 mm 2 380 v~ 10 a 0.5 w dkt 4 pa dkt 4 pa 1686940000 1115660000 dkt 4 /35pa dkt 4/35 pa 0687460000 1115760000 type cat. no. qty. ts 32 0122800000 2 m ts 35 x 7.5 0383400000 2 m ts 35 x 15 0498000000 2 m ewk 1 (8.5) 0206160000 50 ew 35 (8.5) 0383560000 50 ap pa (1.5) 0687560000 20 tsch 4 0363360000 100 qb 2* 0482700000 100 qb 3* 0482800000 50 qb 4* 0482900000 50 qb 75 blank* 0526400000 10 insulation profile 0526700000 housings
295 housings dimensions terminal width (+fitting tolerance 0.2) insulating stripping length connection data screw connection, solid screw connection, stranded conductor cross-section tightening torque range torque phase with dms 2 electric screwdriver rated data acc. to vde rated cross-section rated voltage rated current power loss connection diagram ordering data terminal for ts 32 y type cat. no. for ts 35 w type cat. no. matching contour frame for ts 32 y type cat. no. for ts 35 w type cat. no. accessories mounting rail (2 m lenghts) end bracket (thickness mm) for ts 35 end plate (thickness mm) cross-connection 2-pole (preassembled) 3-pole 4-pole 10-pole terminals wdk 2.5 wdk 2.5 f wdk 2.5 ff 5 mm 5 mm 10 mm 10 mm 0.5? mm 2 0.5? mm 2 0.5?.5 mm 2 0.5?.5 mm 2 awg 26? awg 26? 0.4 - 0.7 nm 1 2.5 mm 2 380 v~ 26 a 0.5 w wdk 2.5 wdk 2.5 1023200000 1023100000 wzr wdk 2.5 1074000000 type cat. no. qty. ts 35 x 7.5 0383400000 2m slotted 0514500000 2m ts 35 x 15 0498000000 2m ew 35 (8.5) 0383560000 50 wap 1059100000 100 wqv 2.5 1053660000 50 wqv 2.5 1053760000 50 wqv 2.5 1053860000 50 wqv 2.5 1054460000 50 5 mm 10 mm 0.5? mm 2 0.5?.5 mm 2 awg 26? 0.4 - 0.7 nm 1 2.5 mm 2 380 v~ 12 a (2 x 6 a) 0.5 w wdk 2.5 f 1021600000 wzr wdk 2.5 1074000000 type cat. no. qty. ts 35 x 7.5 0383400000 2m slotted 0514500000 2m ts 35 x 15 0498000000 2m ew 35 (8.5) 0383560000 50 wap 1059100000 100 wqv 2.5 1053660000 50 wqv 2.5 1053760000 50 wqv 2.5 1053860000 50 wqv 2.5 1054460000 50 5 mm 1 mm 2 380 v~ 12 a (2 x 6 a) 0.5 w wdk 2.5 ff 1021700000 wzr wdk 2.5 1074000000 type cat. no. qty. ts 35 x 7.5 0383400000 2m slotted 0514500000 2m ts 35 x 15 0498000000 2m ew 35 (8.5) 0383560000 50 wap 1059100000 100 wqv 2.5 1053660000 50 wqv 2.5 1053760000 50 wqv 2.5 1053860000 50 wqv 2.5 1054460000 50 housings
296 housings eg 1 eg 2 rated data reference voltage acc. to vde 0110 1/89 pollution severity overvoltage category current power loss (when mounted in row) protection class flammability acc. to ul level upper temperature limit connection data screw connection solid screw connection stranded tightening torque range torque phase with dms 2 electric srewdriver ordering data housing frame end plate combi foot, latchable assembly plate clamping yoke unit, right clamping yoke unit, left intermediate plate connection spigot connection tab 0.8 x 6.3 mm connection tab 2 x 0.8 x 2.8 mm tab / solder lug 0.8 x 2.8 mm tab / solder lug 0.8 x 4.8 mm printed circuit board, copper-coated printed circuit board 5.08 pitch dimensions see page 300 v 2 ii 10 a 1 w ip 20 v-2 100 ? 0.5...4 mm 2 0.5...2.5 mm 2 0.5 - 1.0 nm 2 type cat. no. qty. eg 32/1 for ts 32 0453560000 20 eg 35/1 for ts 35 0453860000 20 ap pa 0453660000 20 zp 0453760000 20 vz 0510260000 50 s 2.8 0475800000 20 s 4.8 0475700000 20 306, fig. i 300 v 2 ii 10 a 1 w ip 20 v -2 100 ? 0.5...4 mm 2 0.5...2.5 mm 2 0.5 - 1.0 nm 2 type cat. no. qty. eg 2 r 0508860000 20 ap pa 0453660000 20 zb-r 0495960000 20 zb-l 0495860000 20 zp 0453760000 20 vz 0510260000 50 s 6.3 0496100000 100 s 2 x 2.8 0163500000 50 306, fig. ii housings
297 eg 3 eg 4 eg 5 300 v 2 ii 10 a 1.5 w ip 20 v - 2 100 ? 0.5...4 mm 2 0.5...2.5 mm 2 0.4 - 0.8 nm 1 type cat. no. qty. eg 3 r 0163960000 15 ap pa 0133760000 20 rkf 0163860000 20 mpl 0158560000 50 zbe 0138360000 50 zbe 0138360000 50 vz 0510260000 50 s 6.3 0496100000 100 s 2 x 2.8 0163500000 50 lp-cu 0167300000 lp-lr 0167400000 307, fig. v 300 v 2 iii 10 a 1.6 w ip 20 v - 2 100 ? 0.5...4 mm 2 0.5...2.5 mm 2 0.4 - 0.8 nm 1 type cat. no. qty. eg 4 r 1116560000 ap pa 1116060000 20 rkf 1116260000 20 mpl 1116360000 50 zbe 0138360000 50 zbe 0138360000 50 vz 0510260000 50 zp 0453760000 307, fig. vi 300 v 2 iii 1 a 1.6 w ip 20 v - 2 100 ? 0.5...4 mm 2 0.5...2.5 mm 2 0.5 - 0.8 nm 1 type cat. no. qty. eg 5 r 1116860000 ap pa 1116160000 20 rkf 1116260000 20 mpl 1116360000 50 zbe 0138360000 50 zbe 0138360000 50 vz 0510260000 50 zp 0453760000 307, fig. vii housings housings
298 housing version polyamide pa 6.6 flammability class u2 (ul 94) colour grey notes: blz may only be actuated with the supply disconnected. if small power ratings need to be switched for operating reasons, empirical values are available on request. description housing base completely assembled with locking foot, not cross-connectable housing base completely assembled with locking foot, cross- connectable top part with transparent cover/top unit pin header 5.08/3-pole orange; right pin header 5.08/3-pole orange; left connector socket 2-pole for blz 5.08/2 screw terminal - orange - black other colours are available on request connector socket 3-pole for blz 5.08/3 terminal - orange - black other colours are available on request connector socket 2-pole for blz 5.08/3 tension clamp terminal - orange - black connector socket 3-pole for blz 5.08/3 tension clamp terminal - orange - black accessories cross-connection zqv 2.5n/2 black cross-connection zqv 2.5n/2 red cross-connection zqv 2.5n/2 blue cross-connection zqv 2.5n/2 yellow coding elements for blz blz ko black coding elements for blz blz ko orange ws connector marker ws15/5 multicard* ws10/5 multicard * ws10/5 neutral* screw cap power loss, arranged side by side, type ordering example wavebox s 22.5 housing base completely assembled with locking foot, not cross-connectable top part with transparent cover/top unit pin header 5,08/3-pole orange; right pin header 5.08/3-pole orange; left connector socket 3-pole for blz 5.08/3 screw terminal, orange * marker see page 317 + 318 attention! these wavebox-housings are authorized only to be used in a closed control cubicle! type cat. no. qty. wavebox s 22.5 8426440000 10 wavebox s 22.5 qv 8426450000 10 head 8426460000 10 pin header 8426620000 10 pin header 8426630000 10 connector socket 1526560000 100 connector socket 1526510000 100 connector socket 1707470000 100 connector socket 1707700000 100 zqv 2.5n/2 black 1718080000 60 zqv 2.5n/2 red 1717900000 60 zqv 2.5n/2 blue 1717990000 60 zqv 2.5n/2 yellow 1693800000 60 coding element 1545710000 100 coding element 1573010000 100 -- -- 2.2 w/40 ? type cat. no. 8426440000 1x 8426460000 1x 8426620000 1x 8426630000 1x 1526560000 2x type cat. no. qty. wavebox l 22.5 8426470000 10 wavebox l 22.5 qv 8426480000 10 8426490000 10 8426620000 10 8426630000 10 1526560000 100 1526510000 100 1707470000 100 1707700000 100 1718080000 60 1717900000 60 1717990000 60 1693800000 60 1545710000 100 1573010000 100 -- -- cap 8428120000 - 3 w/20 ? 2.2 w/40 ? dimension drawing, see page 308 wavebox s 22.5 wavebox l 22.5 housings for pluggable printed circuit boards housings
299 housings type cat. no. qty. wavebox 12.5 mm 8426530000 12 wavebox 12.5 mm 8426540000 12 8426550000 12 orange 8427390000 100 orange 8427400000 100 1526460000 100 1526410000 100 1707460000 100 1707690000 100 1718080000 60 1717900000 60 1717990000 60 1693800000 60 1678530000 1 1609890000 96 1635010000 144 1060860000 200 cap 8428130000 100 3 w/20 ? 2 w/40 ? type cat. no. qty. wavebox 17.5 mm 8426560000 8 wavebox 17.5 mm 8426570000 8 8426580000 8 beige 8449220000 100 beige 8449230000 100 1526560000 100 1526510000 1707470000 100 1707700000 100 1718080000 60 1717900000 60 1717990000 60 1693800000 60 1678530000 1 1609890000 96 -- -- cap 8428120000 100 3 w/20 ? 2 w/40 ? dimension drawing, see page 308 wavebox 12.5 mm wavebox 17.5 mm housing version polyamide pa 6.6 flammability class u2 (ul 94) colour grey hinweise: blz may only be actuated with the supply disconnected. if small power ratings need to be switched for operating reasons, empirical values are available on request. description housing base completely assembled with locking foot, not cross-connectable housing base completely assembled with locking foot, cross- connectable top part with transparent cover/top unit pin header 5.08/2/3-pole; right pin header 5.08/2/3-pole; left connector socket 2-pole for blz 5.08/2 screw terminal - orange - black other colours are available on request connector socket 3-pole for blz 5.08/3 screw terminal - orange - black other colours are available on request connector socket 2-pole for blz 5.08/3 tension clamp terminal - orange - black connector socket 3-pole for blz 5.08/3 tension clamp terminal - orange - black accessories cross-connection zqv 2.5n/2 black cross-connection zqv 2.5n/2 red cross-connection zqv 2.5n/2 blue cross-connection zqv 2.5n/2 yellow coding elements for blz blz ko black coding elements for blz blz ko orange ws connector marker ws15/5 multicard* ws10/5 multicard * ws10/5 neutral* screw cap power loss, arranged side by side, type * marker see page 317 + 318 attention! these wavebox-housings are authorized only to be used in a closed control cubicle! housings for pluggable printed circuit boards housings
300 housings seg-u/lpu eg 6 32 v nach vde 0110/1.89 2 iii 1 a/ u 50 0 c 12 m ? 100 x 120 x 1.8 mm ip 00 v - 2 100 ? type cat. no. eg 6 (incl. front plate) 8095840000 307 50 v 2 iii 1 a 1.5 w ip 20 v -2 100 ? 0.5...4 mm 2 0.5...2.5 mm 2 0.5 nm 1 type cat. no. qty. housing seg/u 8007870000 ? cover plate 8066100000 ? 307 rated data reference voltage acc. to vde 0110 1/89 pollution severity overvoltage category current current-carrying capacity of bus contacts volume resistance of bus contacts printed circuit board dimensions power loss (when mounted in row) protection class flammability acc. to ul level upper temperature limit connection data screw connection solid screw connection stranded tightening torque range torque phase with electric screwdriver dms 2 ordering data housing frame end plate combi foot, latchable assembly plate clamping yoke unit, right clamping yoke unit, left intermediate plate connection spigot connection tab 0.8 x 6.3 mm connection tab 2 x 0.8 x 2.8 mm tab / solder lug 0.8 x 2.8 mm tab / solder lug 0.8 x 4.8 mm printed circuit board, copper-coated printed circuit board 2.54 pitch dimensions see page housings
301 locking socket rsx custom-circuit module skh-rs card-holder for rail-mounted profiles individual parts rs 70 dimensions fixing foot spacer printed circuit board ordering data screw connection version tab connection version card holder strip profile fixing foot right, with marking facility fixing foot right, without marking facility fixing foot left, without marking facility fixing foot middle (intermediate foot) fixing foot (rs 80/rs 100) for ts 32/ts 35 spacer 5 mm spacer 15 mm spacer 25 mm spacer 30 mm spacer 45 mm end plate for mounting on rail without cover end plate for direct mounting without cover end plate for mounting on rail with low cover end plate for direct mounting with low cover end plate for mounting on rail with high cover end plate for direct mounting with high cover cover profile, low cover profile, high screws accessories insert tag (unprinted) protective strip, transparent for soldering 5 components height of solder lugs: 6 mm solder lug spacing: approx. 20 mm max. voltage: 250 v~ max. current: 5 a type cat. no. rsx 0329761001 rsx-f 0329860000 total width: 77 mm length: 25 mm inside height: 66 mm inside width: 55 mm can be engaged together with rs 70 individual parts for vertical insertion of a printed circuit board width: 60 mm thickness: 1.8 (+0.15) mm (din 40802 t. 2) type cat. no. qty. skh-rs 4163020000 1 rfb 0119560000 20 rfo 0126260000 20 rf 0119660000 20 rfm 0213760000 20 zw 5 0119760000 20 zw 15 0119860000 20 zw 25 0126160000 20 zw 30 0119960000 20 zw 45 0120060000 20 eso 7 0515200000 ? sst 7 0515300000 20 housings housings
302 locking socket rs 45 strip profile rs 70 locking socket individual parts dimensions ) fixing foot spacer printed circuit board rated data flammability acc. to ul level upper temperature limit ordering data string profile fixing foot right, with marking facility fixing foot right, without marking facility fixing foot left, without marking facility fixing foot middle (intermediate foot) fixing foot (rs 80/rs 100) for ts 32/ts 35 spacer 5 mm spacer 15 mm spacer 25 mm spacer 30 mm spacer 45 mm end plate for mounting on rail without cover end plate for direct mounting without cover end plate for mounting on rail with low cover end plate for direct mounting with low cover end plate for mounting on rail with high cover end plate for direct mounting with high cover cover profile, low cover profile, high screws accessories insert tag (unprinted) protective strip, transparent total width: 45 mm length: 1000 mm/2000 mm for horizontal insertion of a printed circuit board width: 42 (+0.5) mm thickness: 1.8 (+0.15) mm (din 40802 t. 2) length: optional/60?000 mm dim. of rs section: printed circuit board length ?4.5 mm dim. of adp section: printed circuit board length ?1 mm example: circuit board length 160 mm, rs = 155.5 mm, adp = 159 mm v-0 / v-2 strip profile / accessories 70 ? type cat. no. qty. rs 45 (up to 2000 mm) 4027750000 1 rs 45 (up to 1000 mm) 8140880000 1 ap 45/li ap 45/re 8143910000 8143900000 20 ap 45/li di ap 45/re di 8140870000 8140860000 20 30 x 14 4011200000 width: 10 mm ma?rf width: 5 mm/15 mm/25 mm/30 mm/45 mm dim. zw width: rs-br.? mm (ex.: rs=45 mm, lp=43 mm) dim. a length: 67.8 (?.2 ) mm dim. l thickness: 1.6 (?.2) mm (din 40802 part 2) v-2 100 ? type cat. no. qty. rfb 0119560000 rfo 0126260000 20 rf 0119660000 20 rfm 0213760000 20 zw 5 0119760000 20 zw 15 0119860000 20 zw 25 0126160000 20 zw 30 0119960000 20 zw 45 0120060000 20 eso 7 0515200000 sst 7 0515300000 100 ap 45 / li ap 45 / li di ap 45/re di ap 45/re housings
303 housings rs 80 strip profile rs 100 strip profile for euro-cards total width: 84 mm length: 2000 mm for horizontal insertion of a printed circuit board width: 67.8 (+0.2) mm thickness: 1.8 (+0.15) mm (din 40802 t. 2) dim. rs section printed circuit board length ?.5 mm dim. adp section printed circuit board length ? mm example: circuit board length 160 mm, rs = 155.5 mm, adp = 158 mm v-0 / v-2 strip profile / accessories 70 ? type orange (ral 2000) grey (ral 7032) qty. rs 80 (2000 mm) grey 4183130000 1 rs 80 (2000 mm) orange 4157440000 1 rf 180 1324460000 1773400000 20 ap 80 1324260000 8320300000 20 ap 80 d 1324360000 20 ap rf 80 re 8156200000 - ap rf 80 lt 8156210000 - ap 85 1410860000 20 ap 85 d 1411060000 20 ap 86 1410960000 20 ap 86 d 1411160000 20 adp 5 (1000 mm) 4167150000 adp 6 (1000 mm) 4167160000 30 x 14 4011200000 total width: 104 mm length: 2000 mm/160 mm for horizontal insertion of a printed circuit board width: 100 (+0.5) mm thickness: 1.8 (+0.5) mm (din 40802 part 2) dim. rs section printed circuit board length ?.5 mm dim. adp section printed circuit board length ? mm example: circuit board length 160 mm, rs = 155.5 mm, adp = 159 mm v-0 / v-2 strip profile / accessories 70 ? type orange (ral 2000) grey (ral 7032) qty. rs 100 (2000 mm) grey 4010870000 1 rs 100 (2000 mm) orange 4144870000 1 rs 100 (155 mm) 4148400000 1 rf 180 1324460000 1773400000 20 ap 100 1185060000 1773410000 20 ap 100 d 1185160000 20 ap 110 1185260000 20 ap 110 d 1185360000 20 ap 111 1185460000 20 ap 111 d 1185560000 20 adp 10 (2000 mm) 4169320000 (2 m) adp 11 (2000 mm) 4169330000 (2 m) 40 x 14 4019420000 rs 80 screws screws rf 180 ap 80 ap 85 ap 86 adp 5 adp 6 ap 80 d ap 85 d ap 86 d ap 110 ap 111 rs 100 adp 10 adp 11 ap 100 d ap 110 d ap 111 d ap 100 rf 180 ap rf80 re/lt housings
304 housings housings eg?rst ost dimensions connection data accessories egr / eg 7 egr / ego eg 7/35 for ts 35 eg 7/combi foot width (mm) 10 10 height (mm) with ts 35 x 7.5 92 96 with ts 35 x 15 100 103 with ts 32 100 rst/ost eg 7 width (mm) 10 height assembled (mm) 823472 for ts 32 with ts 35 x 7.5 91 with ts 35 x 15 99 819383 with combi foot with ts 35 x 7.5 93 with ts 35 x 15 101 with ts 32 97 dimensions eg 8 width (mm) 12.5 height (mm) 104.9 eg 12 width (mm) 18 height (mm) 104.9 eg 8 eg 12 rst / eg 7 eg 8 / eg 12
housings 305 housings housings miniconditioner mcz dimensions connection data accessories dimensions width (mm) + fitting tolerance 0.2 insulating stripping length (mm) connection data z-spring connection, solid z-spring connections, stranded connection cross-section accessories mounting rail (2 m lenghts) w mounting rail (2 m lenghts) u end plate end bracket for ts 35 cross-connection (pluggable) 6 6 0.5?.5 mm2 0.5?.5 mm2 awg 26?6 type cat. no. ts 35 x 7.5 0383400000 ts 35 x 15 0498000000 apmcz 1.5 8389030000 ew 35 0383560000 ew 35 0383560000 zqv 4 2-pole 1608950000 zqv 4 3-pole 1608960000 zqv 4 4-pole 1608970000 zqv 4 5-pole 1608980000 zqv 4 6-pole 1608990000 zqv 4 7-pole 1609000000 zqv 4 8-pole 1609010000 zqv 4 9-pole 1609020000 zqv 4 10-pole 1609030000 91 additional labelling transparent head-plate ts-kontakt cross-connection 63.2 56 88,4 73 69 77 62 housings dimensions connection data accessories dk 5 6 mm 9 mm 0.5...4 mm 2 0.5...4 mm 2 awg 20...12 type cat. no. ts 32 0122800000 ts 35 x 7.5 0383400000 ts 3 5x15 0498000000 ewk 2 0199360000 ew 35 0383560000 ap 8268870000 dekafix 5 dk 6 8 mm 9 mm 0.5...4 mm 2 0.5...4 mm 2 awg 20...12 type cat. no. ts 32 ts 35 x 7.5 0383400000 ts 3 5x15 0498000000 ewk 2 0199360000 ew 35 0383560000 ap 8324560000 dekafix 5 dimensions terminal width (+ fitting tolerance 0.2 mm) insulating stripping length connection data screw connection, solid screw connection, stranded connection cross-section accessories mounting rail (2 m lenghts) y w v end bracket for ts 32 for ts 35 end plate marking material* *f or more inormation see sectional catalogue 5/installation products dk 6 dk 5
306 housings housings eg?eg-u/lpu dimensions connection data accessories eg 1 - fig. i eg 2 - fig. ii dimensions terminal width (+fitting tolerance 0.2 mm) insulating stripping length connection data screw connection, solid screw connection, stranded connection cross-section accessories mounting rail (2 m lenghts) y w u end bracket for ts 32 for ts 35 cross connection wire: 80 mm long, 50-pole/1 mm 2 marking material* dimensions terminal width (+fitting tolerance 0.2 mm) insulating stripping length connection data screw connection, solid screw connection, stranded tab connection (din 46247) connection cross-section accessories mounting rail (2 m lenghts) y w u end bracket for ts 32 for ts 35 cross connection wire: 80 mm long, 50-pole/1 mm 2 marking material* * see sectional catalogue 7 18 mm 12 mm 0.5? mm 2 0.5? mm 2 awg 20?2 type cat. no. ts 32 0122800000 ts 35 x 7.5 0383400000 ts 35 x 15 0498000000 ekw 2 0199360000 ew 35 0383560000 qd 50/grey 0238700000 dekafix 5 eg 2 ?fig. iii 18 mm 2x 0.8 x 2.8 mm or 1x 0.8 x 6.3 mm type cat. no. ts 32 0122800000 ts 35 x 7.5 0383400000 ts 35 x 15 0498000000 ekw 2 0199360000 ew 35 0383560000 qd 50/grey 0238700000 dekafix 5 20 mm 12 mm 0.5? mm 2 0.5? mm 2 awg 20?2 type cat. no. ts 32 0122800000 ts 35 x 7.5 0383400000 ts 35 x 15 0498000000 ekw 2 0199360000 ew 35 0383560000 qd 50/grey 0238700000 dekafix 5 eg 2 ?fig. iv 18 mm 2x 0.8 x 2.8 mm type cat. no. ts 32 0122800000 ts 35 x 7.5 0383400000 ts 35 x 15 0498000000 ekw 2 0199360000 ew 35 0383560000 qd 50/grey 0238700000 dekafix 5
housings 307 housings seg-u/lpu 22.5 mm 17 mm 0.5? mm 2 0.5?.5 mm 2 type cat. no. ts 32 0122800000 ts 35 x 7.5 0383400000 ts 35 x 15 0498000000 ekw 2 0199360000 ew 35 0383560000 qd 50/grey 0238700000 dekafix 6.5 eg 4 ?fig. vi 22.5 mm 17 mm 0.5? mm 2 0.5?.5 mm 2 awg 22?2 type cat. no. ts 32 0122800000 ts 35 x 7.5 0383400000 ts 35 x 15 0498000000 ekw 2 0199360000 ew 35 0383560000 qd 50/grey 0238700000 dekafix 6.5 dekafix 6.5 eg 5 ?fig. vii 22.5 mm 17 mm 0.5? mm 2 0.5?.5 mm 2 awg 22?2 type cat. no. ts 32 0122800000 ts 35 x 7.5 0383400000 ts 35 x 15 0498000000 ekw 2 0199360000 ew 35 0383560000 qd 50/grey 0238700000 dekafix 6.5 20 mm 17 mm 0.5? mm 2 0.5?.5 mm 2 awg 26?4 type cat. no. ts 32 0122800000 ts 35 x 7.5 0383400000 ts 35 x 15 0498000000 ekw 2 0199360000 ew 35 0383560000 qd 50/grey 0238700000 dekafix 5 eg 6 type cat. no. ts 35 x 7.5 0383400000 ts 35 x 15 0498000000 ew 35 0383560000 dekafix 6.5 with assembly plate mpl with assembly plate mpl anreihma eg 3 - fig. v
308 housings printed circuit board s 22.5 printed circuit board l 22.5 wavebox s 22.5 wavebox l 22.5 wavebox 17.5 wavebox 12.5
housings 309 housings socket blocks blz 5.08 / blzf 5.08 materials data insulating material colour temperature range flammability class contact base material contact surface characteristic system values pitch clearance creepage distance connection technology length of soldering pin mounting hole insulating stripping length terminal screw isolations resistance trough resistance connectable wires terminal range ??solid h05(07)v-u ??flexible h05(07)v-k ??with ferrules according to din 46228/1 with plastic collar according to din 46228/4 awg wire plug gauge acc. to en 60947-1/10.91 size rated data according to vde rated cross-section rated current current capacity test voltage nominal torque rated data according to rated cross-section rated current (tu=20?) rated voltage rated impulse voltage pollution severity rated data according to ul awg wire rated current rated voltage, industriell operation tool screwdriver type sd/sdi 5 approvals blz 5.08/sl 5.08 pbt orange -20.. +100 ? ul 94 (vo) cusn tin plated 5.08 mm 2.5 mm 4.0 mm screw/solder connection 3.2/4.5 mm ?1.3 + 0.1 mm 7 mm m 2.5 10 m ? 5 m ? 0.08...2.5 mm 2 0.5...2.5 mm 2 0.5...2.5 mm 2 0.5...2.5 mm 2 0.5...1.5 mm 2 28...14 a3 2.5mm 2 12a 1) see derating curves 2) 2.0 kv~ 0.5 nm rated data according to ul 22...12 10 a 300 v~ list on request blzf 5.08 pbt orange -20.. +100 ? ul 94 (vo) cusn tin plated 5.08 mm 3 mm 4.0 mm tension clamp connection 7 mm 10 5 m ? 5 m ? 1.5 mm 2 0.13...1.5 mm 2 0.13...2.5 mm 2 0.05...2.5 mm 2 1.5 mm 2 26...14 vde 0110 2.79 2.5mm 2 12a 1) see derating curves 2) 2.0 kv~ vde 0110 1.89 1.5mm 2 12a 3) 250 v 4 kv 3 26...14 10 a 300 v~ applied for 1 ) rated cross-section and max. number of poles established from derating curve at 20 ? ambient tempera- ture 2 ) further derating curves on demand ambient temperature (?) ambient temperature (?) ambient temperature (?) belastungsstrom (a) belastungsstrom (a) (a) ambient temperature (?) ambient temperature (?) ambient temperature (?) load voltage (a) load voltage (a) load voltage (a) derating curve derating curve derating curve pin header with blz(f) / h07v-k1 5 / 3 poe pin header with blz(f) / h05v-k0 75 / 3 poe pin header with blz(f) / h07v-k1 5 / 3 poe
310 housings rail mounting without cover locking socket profiles rs rs 80 rs 100 adp 5 / adp 6 adp 10 / adp 11 direct mounting without cover rail mounting with low cover direct mounting with low cover rail mounting with high cover direct mounting with high cover fixing holes
housings 311 housings ordering data technical data input voltage output voltage rated current flammability class acc. to ul 94 insulation coordination acc. to en 50178 rated voltage rated impulse voltage input circuit output circuit input < output overvoltage category pollution severity ambient conditions ambient temperature storage temperature dimensions length / width / height soldering pin 1) equipped with with contact sockets b, c, f, h 2) equipped with with contact sockets a, b, c, f, h type cat. no. os2 9455210000 1 ) os2/5 9457640000 2 ) 250 v 250 v 5 a v-2 250 v 4 kv (1.2/50 ?) 4 kv (1.2/50 ?) < 8 kv (1.2/50 ?) iii 2 - 25? ?+ 50? - 40? ?+ 85? 49,78 / 12.5 /13.2 mm 3.2 mm * soldering process ventilation not dimensioned in detail pluggable relay socket rss 5mm suitable for pcb mounting for miniature all-or-nothing relays type tyco snr, nais ape mechanical interlock with eject lever ordering data technical data input voltage output voltage max. switching current rated current flammability class acc. to ul 94 insulation coordination acc. to en 50178 rated voltage rated impulse voltage input circuit output circuit input < output overvoltage category pollution severity ambient conditions ambient temperature storage temperature dimensions length / width / height soldering pin type cat. no. rss 5 mm 4056360000 250 v 250 v 6 a 5 a v-2 250 v 4 kv (1.2/50 ?) 4 kv (1.2/50 ?) < 8 kv (1.2/50 ?) iii 2 - 25? ?+ 50? - 40? ?+ 85? 30.2 / 5 / 30 mm 3.5 mm * semi-wire relay socket os 2 and os 2/5 suitable for pcb mounting for solid state relais type opto 22, crouzet secured in socket by fixing screws integrated in the module lock srew

▲Up To Search▲

Price & Availability of 1116260000

	To Download 1116260000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .